10kw WLXP2000 Automatic Insulating Glass Unloading Double Glazing Machine
Usage of automatic insulating glass unloading machine:
Insulating Glass Automatic Unloading Machine was produced by customers’ demands, for example, costing labor and material resources to unload glass because of heavy-weight glass. It is a patented product who is a more practical porter from home and abroad.
Main Festure of Automatic insulating glass unloading machine:
1. It adopts Panasonic PLC control,10 inches touch screen.the dynamical system adopts 3 servo motors drive,easy to operate.the putting way for glass is of common putting,up/down putting.
2.V belt can automatically adjust to the center position of glass thickness;The motor drives ballscrew of reduction gear to adjust the V belt.The displacement sensor inducts the original point,and move on the liner track.
3. The machine-head automatically goes up to the glass height,if glass size is too small,it is not necessary to go up;the servo motor drives the reduction gear by chain sprocket on the liner track to make the machine head up/down,so that it can accurately the needed height.
4. The transportation section automatically conveys the glass to the center position of sucker support.The servo motor drives the reduction gear by chain sprocket on the liner track to transport the glass to the sucker central position.
5. The sucker support can automatically adjust at up/down by glass’s length and width;When glass reaches to the needed position,the assistant bracket goes backward; The two air cylinder drives the four-bar linkage to make the active plate move front/back,so that it can guarantee the parallel synchronicity.
6 The machine can save labor 2-3people,and improve the working efficiencyby 2 times.
7 The sucker up/down, sucker front/back,V belt transportation are drived by servo motor,it can be put at the accurate position.
Technique parameter:
| Max glass size |
2500mmX3000mm |
| Glass thickness |
12-48mm |
| Suction arm speed |
0-12m/min |
| The max size of suction arm stretched out |
800mm |
| The work angle of swing arm |
84~100° |
| Air consumption |
100L/min |
| Total power |
10KW |
| Total weight |
2000KG |
| Dimension |
2650x2600x2900mm |
Main components:
| No. |
Name |
Brand |
Origin |
| 1 |
Servo motor |
Panasonic |
Japan |
| 2 |
Control system(PLC) |
Mitsubishi |
Japan |
| 3 |
Liner rail |
HIWIN |
Taiwan |
| 4 |
optoelectronic switch |
Autonics |
South Korea |
| 5 |
Approach switch |
Autonics |
South Korea |
| 6 |
Electric component |
Schneider |
France |
| 7 |
Touch screen |
WEILUN |
Taiwan |
| 8 |
Air treatment |
Airtac |
Taiwan |
| 9 |
Air solenoid valve |
Airtac |
Taiwan |
| 10 |
Air cylinder |
Airtac |
Taiwan |
After sales service
1 Online support,for example email and open camea to solve problems
2 Field installation, commissioning and training
3 Field maintenance and repair service
4 Video technical support
Product Tags:
|
|
Simple Operation Glass Processing Equipment Automatic Panasonic System Control Images
|
